Current Issue
May 2014 magazine cover
Subscribe

Save 47% off the cover price!

High Tension

Helicopter pilots play chicken with high-voltage power lines so crews can work on live wires.

In 1979, Michael Kurtgis was transporting Florida Power and Light employees as the company’s chief helicopter pilot. He considered the time that conventional crews spent setting up and breaking down for even simple power line tasks, and figured that a helicopter could speed things up immensely. He approached his managers and two helicopter manufacturers with the idea of working on live transmission lines from a helicopter and proposed some trial runs, since no one had ever tried flying so close to wires—not on purpose, that is. “They thought I was out to lunch,” he says. Kurtgis resigned to start his own power line maintenance contracting company, USA Airmobile in Fort Lauderdale, and patented his methods, but couldn’t prove his idea would work because no power company would allow him to connect his helicopter to an energized power line—that is, establish an electrical connection between the conductive helicopter frame and power line, equalizing the electrical potential so that whatever—or whoever—touches the line won’t get shocked.

Nearly two years went by before Kurtgis got his chance. In early 1981, USA Airmobile won a contract to power-wash insulators on a 115,000-volt line in Dammam, Saudi Arabia. One day during the job, Kurtgis, ready to start work in a Bell 206 JetRanger, had an impulse: He called over the intercom to crewman Jim True, “It’s now or never.” Out here, there was no one to put up roadblocks. “We’ll never get this kind of chance again,” Kurtgis said.

True asked Kurtgis whether he was really sure this would work. Kurtgis said he was pretty sure.

Nobody in a helicopter had physically connected with a live, high-voltage conductor, and the people that Kurtgis had talked to weren’t sure what would happen. A short circuit from high-tension lines to the ground, perhaps through a fallen tree, is enough to blow the tree apart. Would connecting the line to a helicopter stun the crew, or ignite fumes in the fuel tank? A Florida Power manager predicted that a voltage surge would short out the helicopter’s electrical bus.

Airmobile crews had already worked close enough to energized lines to learn that protective clothing is a must. Kurtgis had a close encounter with a 500,000-volt line before he had even tried to touch any energized lines from a helicopter. “It was like a whole bunch of fire ants were biting you,” he recalled. What had bitten him was “induced current.” High-voltage power lines create a very strong electromagnetic field that reaches far beyond the three conductor wires. This field is not so much a byproduct of the current as a carrier of the current itself. Anyone in the immediate vicinity, like the pilot in a hovering helicopter, is in this field and will feel an induced current along his skin regardless of whether he touches the power line. The sensation is itchy at lower voltages and distinctly painful at higher voltages. Kurtgis learned that a suit of conductive clothing—Nomex fabric with a weave of 25 percent fine-mesh stainless steel wire—allows the  current to flow around the skin.

When Kurtgis sidled the JetRanger close enough, True swung the conductive metal boom of the power washer over to the 115,000-volt power line, causing an arc and the attendant buzzing noise as the arc hit the boom. The arc jumps because the helicopter has a different electrical potential than the power line, and the voltage wants to jump across the air gap to equalize them. Even though he expected an arc, True yelped in surprise, but they were still in the air. Once that connection was made, it was easy to “bond” to the line—attach a cable from the helicopter frame to the line to maintain a good electrical connection between the two. Using such techniques, crews have connected the frames of their helicopters to power lines carrying a million volts.

I met up with Kurtgis last August at a power line training facility operated by American Electric Power near South Bend, Indiana. Performing for a small group of electric-utility maintenance managers, Kurtgis’ crew took a Bell 206 JetRanger through its paces: power-washing insulators to blast off dirt that can cause a short circuit to the tower, hanging a big orange plastic ball on the topmost wires to warn off aircraft, and bolting on spacer brackets that keep parallel wires from chafing each other in the wind.

Much live-line maintenance work involves a lineman sitting on an aluminum platform suspended from the helicopter frame. From this perch, sitting just below the pilot, the lineman has a better reach and posture than he would achieve by leaning out the helicopter door (and the pilot can easily keep him in close sight). It also provides a secure mounting for his generator or air compressor for power tools. Under federal aviation regulations, such an external load puts a helicopter in a restricted category. A crew must be able to jettison the platform in an emergency and therefore cannot hover over occupied buildings or congested areas while carrying it. A lineman working from a platform connects his safety harness to the helicopter rather than to the platform.

In some cases the lineman hangs 50 feet or more below the helicopter at the end of a string of “hot sticks,” rigid fiberglass rods. Since fiberglass does not conduct electricity, the pilot can drop off the lineman at places that the helicopter could not safely approach.

Airmobile’s chief pilot, Doug Lane, flew helicopter gunships for a year in Vietnam and was shot down twice; on the way to Airmobile he flew freight, did traffic reporting, and shuttled oilfield workers to platforms in the Gulf of Mexico. According to Lane, on top of learning new regulations, power line technology, and his company’s specific procedures, an incoming pilot needs to break through a mental barrier to be willing to bring the lineman close enough to the wire—about eight inches from his chest. “When he first comes in,” Lane says, “he’s saying to himself, ‘I don’t want to hurt this guy,’ meaning the lineman, so he’s keeping his distance from the lines. But everything the lineman does is from the upper body, because he’s sitting on the platform.” At times linemen work with pulleys, clamps, and tools that are too heavy to reach out very far with. “The pilot can work [a lineman] to death in two hours if he stays too far away,” Lane said. “He wants the work right in his face.”

About James R. Chiles

James R. Chiles contributes frequently to Air & Space/Smithsonian. His book on the social history of helicopters and “helicoptrians” is The God Machine: From Boomerangs to Black Hawks.

Read more from this author

Comment on this Story

comments powered by Disqus