Superduperjumbo- page 2 | Flight Today | Air & Space Magazine

Superduperjumbo

Double the size of an Airbus A380? No problem, aerodynamicists say.

Air & Space Magazine | Subscribe

(Continued from page 1)

Charles Champion, the number-two officer at Airbus and head of the A380 program, acknowledges the company paid an aerodynamic penalty for the 80-meter box. The A380, he says, is a giant flying compromise between the aerodynamic and financial forces that say that say bigger is better and the practical realities of assembling the behemoth and bringing it back down to earth.

With the A380 limited in wingspan, its designers looked to power: They’d need four engines blasting a total of 280,000 pounds of thrust—more power than any other commercial airliner—to lift it into the air. The Engine Alliance, a joint venture of General Electric and Pratt & Whitney, makes one of the two engines available for the A380. (Rolls-Royce makes the other.) Engines that power modern airliners use large fans at the front to suck in huge amounts of air. The bigger the fan, the greater the volume of air forced rearward and therefore the more thrust an engine can produce. The Engine Alliance fan has a diameter of 9.7 feet and is rated at 76,500 pounds of thrust (and produced 94,000 pounds during testing). That’s big, but it’s not the biggest jet engine. That title goes to the one on the twin-engine Boeing 777, with a fan measuring 10.7 feet and blasting up to a record 122,965 pounds of thrust.

If Kroo’s superduperjumbo had to take off on today’s international airport runways, it would need somewhere between 500,000 and 750,000 pounds of thrust to get off the ground in the runway length allotted. With a reasonably efficient wing, an aircraft needs thrust equal to between 20 and 30 percent of its takeoff weight to lift off from a runway of about 10,000 feet, the typical length of runways at today’s international airports. (If the engines could provide thrust equal to 100 percent of the takeoff weight, says Kroo, “you could go straight up.”) To provide enought thrust  to the superduperjumbo—more than 500,000 pounds—you’d have to equip it with eight of the massive engines that power the A380—compared to the four on the Airbus. (Hanging eight engines has been done before—on Boeing’s B-52, for example.)

The cost of a bigger engine is more weight, requiring the airplane to carry more fuel to fly with the extra weight, and still more fuel to carry the weight of the extra fuel, says Bruce Hughes, Engine Alliance president. To compensate, designers scoured the A380 engine for ways to shed weight—thinning its walls, shaving its airfoils, and using hollow titanium blades sculpted like sinuous modern art. After dozens of trade-offs, engine and airframe designers came up with the power-to-weight ratio needed.

“There’s no reason you couldn’t just keep building bigger and bigger planes,” says Dennis Bushnell, chief scientist at NASA’s Langley Research Center in Virginia, who has studied designs for very large passenger aircraft. “The problem you run into is whether the airport infrastructure can handle them, and whether you have the margin of safety that you need to have.”

John McMasters, an aerodynamicist at Boeing who worked with Kroo on his 1996 analysis of large aircraft, contemplated the problems of fitting the beasts  into existing airport infrastructure and found a way out: He designed a seaplane. That way, he reasoned, he wouldn’t have to worry about finding a runway big enough to land on. He calls his concept the Super Clipper, a modern successor to the luxurious flying boats that Pan Am designed in the years before World War II, when runways were scarce. The vast, 239-foot wings of his design would be supported with floats made from the fuselages of 747s, which would themselves carry some of the Super Clipper’s 1,200 passengers. Though it might fly slower than today’s aircraft, it would make up for its leisurely speed by offering its passengers enough room for jogging tracks, ballrooms, and wine bars—featuring Las Vegas-style lounge acts on selected routes.

 “If you’re going to do a big plane, why don’t you do something grand?” McMasters says. “The airlines like big planes because they move lots of people. Why not build something people will like too?”

McMasters’ seagoing Super Clipper is a fanciful extrapolation from his study of large aircraft configurations. He has also studied the prospect of a giant flying wing, a design that NASA has continued to study. At this point, Boeing’s interest is purely in military applications, and the company will fly a scale model of the Blended Wing Body aircraft at NASA’s Dryden Flight Research Center in California this fall. If a full-scale commercial version were to be developed, it would face the same problem the A-380 faces: airports.

London’s Heathrow is the third busiest in the world (after Atlanta and Chicago) and, as the airport handling more international travelers than any other, probably the most cramped for space. When Airbus designers approached airports around the world starting in 1996, Heathrow was enthusiastic because the A380’s capacity could squeeze more people into each of its coveted landing slots. The airport now expects 65 superjumbo flights a day by 2015.

But big airplanes create big demands on the ground: Heathrow is spending about $800 million to rebuild itself, widening runways, adding taxiways, lengthening baggage conveyors, and renovating a terminal to create four superjumbo-size gates almost as wide as Big Ben is tall. The airport is also building a new terminal, to be completed by 2011, that will include 14 gates that can accommodate the A380; two of the 14 opened this year.

About Michael Milstein

Michael Milstein is a freelance writer who specializes in science. He lives in Portland, Oregon.

Read more from this author

Comment on this Story

comments powered by Disqus