The Father of Chinese Aviation
Feng Ru made history on the California coast, then introduced airplanes to his native land.
- By Rebecca Maksel
- AirSpaceMag.com, August 13, 2008
At twilight on a Tuesday evening in September 1909, Feng Ru prepared to test an airplane of his own design above the gently rolling hills of Oakland, California. It was just six years after Orville and Wilbur Wright took to the skies at Kill Devil Hills, North Carolina, and only a year after their first public flights.
“The big bi-plane, with its four starting wheels tucked beneath it like the talons of a bird, sailed slowly in an elliptical course around the crest of the hill nearly back to the starting point,” reported the Oakland Enquirer in its September 23 edition. For an astonishing 20 minutes Feng circled the Piedmont area, never more than 12 feet off the ground. Suddenly, a bolt holding the propeller to the shaft snapped, sending Feng tumbling to earth, bruised but otherwise unharmed.
While Feng Ru is little known in the United States, his fame in China is equivalent to the Wright brothers’. Middle- and high schools are named in his honor, and his childhood home is a museum; China even considers its space program to be based upon the foundations of Feng’s work.
Feng immigrated to the U.S. from China sometime between 1894 and 1898, when he was in his early teens, and immediately set to work doing odd jobs at a Chinese mission in San Francisco. “He was staggered by America’s power and prosperity. He understood that industrialization made the country great, and felt that industrialization could do the same for China,” says historian Patti Gully, who has co-authored a book on the contributions of Chinese living outside their country to the development of aviation in China. “So he went east to learn all he could about machines, working in shipyards, power plants, machine shops, anywhere he could acquire mechanical knowledge.”
Feng became well known for developing alternate versions of the water pump, the generator, the telephone, and the wireless telegraph, some of which were used by San Francisco’s Chinese businessmen. But upon hearing of the Wright brothers’ success, Feng turned his attention to aviation, laboriously translating into Chinese anything he could find on the Wrights, Glenn Curtiss and, later, French aircraft designer Henri Farman.
By 1906, Feng decided to return to California to establish an aircraft factory, building airplanes of his own design. San Francisco’s massive earthquake and resulting fire forced him to relocate to Oakland instead, where, funded by local Chinese businessmen, Feng erected his workshop—a 10- by eight-foot shack. Jammed into this small space were tools, books, journals, mechanical projects, aircraft parts—and Feng himself, who rarely finished work before 3 a.m.
In this tiny spot, the self-taught engineer established the Guangdong Air Vehicle Company in 1909, and completed his first airplane that year, according to the American Institute of Aeronautics and Astronautics. During one test flight, Feng lost control of his airplane (not an unusual occurrence), which plunged into his workshop, setting it ablaze. Feng and his three assistants moved operations to an Oakland hayfield, referred to by the New York Times and the Washington Post as “a hidden retreat.”
“They posted guards at the perimeters of the field to discourage the curious,” says Gully, “and talked to visitors through a crack in the wall.”





Comments (2)
Feng Rocks!
Posted by on January 24,2009 | 01:04 PM
Dear sir,
I am a Dutch stampcollector and I have a stamp showing the
Feng Ru II biplane. Do you have the technical data about this plane? Is it a exact copy of the Curtiss Golden Flyer?
I like to know more about the Chinese plane. I would be much
obliged if you can help me.
Kind regards - Peter van der Jagt / the Netherlands
EDITORS' REPLY: A good place to start your research is the National Air and Space Museum Archives & Library. Go to http://www.nasm.si.edu/research/arch/emailform.cfm
Posted by Peter P. van der Jagt on May 3,2010 | 11:07 AM