An Aircraft Carrier’s Cable Guys

It takes muscle to stop and stow a 25-ton fighter.

A carrier crew pushes an F/A-18C into a tight parking space. (US Navy/Tyler Caswell)
Air & Space Magazine | Subscribe

When Eugene Ely made the world’s first shipboard landing, on the USS Pennsylvania on January 18, 1911, his Curtiss Model D was brought to a stop by a pair of 50-pound sandbags tied onto the ends of a rope. After Ely cut power, the biplane settled onto the deck, and a metal hook on its landing gear snagged several in a series of 22 ropes and held on until Ely stopped 10 feet shy of the captain. As Ely climbed out, sailors removed the hook, hauled in the ropes, and swept up the sand.

Today’s rope is braided steel. Stretching about 120 feet across the deck, the arresting wire is connected at both ends below deck to 1,100-foot purchase cables. Today’s sandbags are mechanical monsters called arresting engines, weighing 43 tons. The system can bring a 50,000-pound jet flying 149 mph to a stop within 344 feet in two seconds. In the span of 45 seconds, today’s sailors straighten the arresting wires, guide aircraft to a parking space, and ready the deck for the next arriving jet.

Find the Wire

During sea trials on the USS Nimitz last November, an F-35C Lightning II hooks one of the four cross-deck pendants—the Navy’s term for arresting wires—that span the carrier deck. The first wire is near the ship’s stern; the others follow at approximately 50-foot intervals.


Comment on this Story

comments powered by Disqus